Position of hydraulic connections Position of hydraulic connections motorcondensing version Electrical connections Unit electric lines and data Electrical data Connection to the electric power supply mains Electric connections Preliminary operations System loading unloading Disconnecting the unit Dismantling and disposal Improper use Important safety information RA refrigerant gas These appliances are designed and built for heating and hot water production and also for cooling and must be used in compatibility with their technical fea- tures.
In spite of this, dangers to the user or third parties may arise, as well as damage to the appliance and other objects, in the event of improper use and use that is not in compliance with that envisioned. Any use not expressly indicated in this manual is not permitted. Consequently AERMEC will not assume any respon- sibility for damage that may occur due to failure to comply with these instructions. The appliance warranty does not cover the costs for ladders, scaffolding, or other elevation systems that may become necessary for carry- ing out servicing under warranty.
The validity of the warranty shall be void in the event of failure to comply with the above-mentioned indications. We remind you that the use of prod- ucts that employ electrical energy and water requires that a number of essential safety rules be followed, such as: This appliance is not suitable for use by persons including children with limited physical, sensory, or mental capacities or those lacking experi- ence or know-how, unless they are supervised or instructed regarding the use of the appliance by a person who is responsible for their safety.
Children must always be supervised to ensure they do not play with the appliance. It is prohibited to carry out any techni- cal or maintenance operation before the unit has been disconnected from the electrical mains by switching off the master switch of the system and the main power switch on the control panel.
It is prohibited to leave containers and flammable substances near to the unit. It is prohibited to touch the appliance when you are barefoot and with parts of the body that are wet or damp.
It is prohibited to open the access hatches to the internal parts of the appliance without first having switched off the system master switch. It is prohibited to disperse or aban- don the packing materials and they must be kept out of the reach of chil- dren, as they are a potential source of danger. NOTE: Tampering, removal, lack of the identi- fication plate or other does not allow safe identification of the product and will make any installation or maintenance operation to be performed difficult.
The heat pump models also allow to produce hot water for heating. They are made up of two RA cooling circuits and a unique hydraulic circuit, which may or may not be supplied with stor- age or pumping unit. The presence of several scroll compressors al- lows NRL chillers various partialisa- tions of the cooling capacity. The electronic adjustment with mi- croprocessor controls and manag- es all components and functioning parameters.
An internal memory records the functioning conditions when an alarm occurs in order to show it on the display. The units have an IP 24 protection rating. Contact the head office for lower values.
KEY: 9. The resistance is powered automatically when the unit stops as long as the unit is live. Air-side heat exchanger High efficiency realised with copper pipes and aluminium louvers blocked by mechani- cal expansion of the pipes. Water-side heat exchanger Plate type aisi , insulated externally with closed cell material to reduce heat loss.
Equipped as per standard with the anti-freeze electric resistance. Liquid separator for heat pump only Positioned on compressor intake for pro- tection against any return of refrigerant fluid, flooded start-up and functioning in the presence of liquids. Liquid storage tank for heat pumps and total recovery only Compensates the difference in volume between louvers coil and plate exchanger, withholding excess liquid.
Dehydrator filter Mechanical dehydrator filter realised in ceramics and hygroscopic material, able to withhold impurities and any traces of humidity present in the cooling circuit. Liquid indicator Used to check the refrigerant gas load and any presence of humidity in the cooling circuit.
Thermostatic valve The mechanical valve, with external equal- iser positioned at evaporator outlet, modu- lates the flow of gas to the evaporator, de- pending on the heat load, in order to ensure a correct level of heating of the intake gas.
Liquid and pressing line cocks cooling versions only Allows interruption of the refrigerant in the case of extraordinary maintenance. Solenoid valve The valve closes when the compressor switches off, blocking the flow of refrigerant gas to the evaporator. By-pass solenoid valve heat pump only By-passes the thermostatic valve during the de-frosting cycle.
One-way valve Allows one-way flow of the refrigerant. Desuperheater on request only Plate type AISI , insulated externally with closed cell material to reduce heat loss. Total recovery on request only Plate type AISI , insulated externally with closed cell material to reduce heat loss. The electric fans are protected electrically by magnet circuit breakers and mechanically by metal anti-intrusion grids, according to the IEC EN Standard.
Larger fans M Support frame Made in hot galvanised sheet steel with suit- able thickness and painted with polyester powders able to resist atmospheric agents through time 5. The possibility of a reserve pump is also en- visioned.
The reserve pump is managed by the circuit board. Flow switch installed as per standard It checks that there is circulation of water. If this is not the case, it blocks the unit. Water filter installed as per standard This allows to block and eliminate any im- purities present in the hydraulic circuits.
It contains a filtering mesh with holes that do not exceed one millimetre. It is indispensa- ble in order to prevent serious damage to the plate exchanger.
Storage tank In sheet steel with capacity of litres. In order to reduce heat loss and eliminate the condensate formation phenomenon, it is in- sulated using polyurethane material with a suitable thickness.
Vent valve all versions Automatic, mounted on the upper part of the hydraulic plant; it discharges any air pockets present in the same. Filling unit versions with storage tank It is equipped with a manometer for the dis- play of system pressure. Expansion vessel versions with storage tank with nitrogen pre-load membrane. Hydraulic circuit safety valve only in versions with storage tank or with pump Calibrated at 6 Bar and with piped dis- charge, which intervenes by discharging overpressure if abnormal work pressures occur.
High pressure pressure switch AP - Cooling only E - Heat pump HE With fixed calibration, placed on high pres- sure side of cooling circuit, it inhibits func- tioning of compressor if abnormal work pressure occurs.
Low pressure transducers TP2 - Cooling only E "accessory" - Heat pump HE "as per standard" Placed on high pressure side of cooling cir- cuit, it signals the work pressure to control board, generating a pre-warning if abnor- mal pressure occurs. High pressure transducers TP3 - Cooling only E "accessory" - Heat pump HE "as per standard" Placed on high pressure side of cooling cir- cuit, it signals the work pressure to control board, generating a pre-warning if abnor- mal pressure occurs.
Anti-freeze electric resistance installed as per standard Its functioning is controlled by the anti- freeze probe positioned in the plate evap- orator. The dedicated software, housed in the adjustment board, manages the elec- tric resistance. Cooling circuit safety valve Intervenes by discharging the overpressure in the case of abnormal pressures. Door-lock isolating switch The electric control board can be accessed by removing the voltage.
Act on the opening lever of the control board itself. This lever can be locked using one or more padlocks during maintenance interventions to prevent the machine being powered up accidentally.
Control board Allows the complete control of the appli- ance. For a more in-depth description please refer to the user manual. Remote control panel Allows to control the chiller at a distance. Compressors magnet circuit breaker pro- tection; Fans magnet circuit breaker protection; Auxiliary magnet circuit breaker protection; Exhaust gas temperature control thermo- stat thermostat.
For further information, please refer to user manual. Select the model using the compatibility table. A - - - - 10 10 10 10 22 E 13 13 13 13 HA - - - - HE 13 13 13 13 GP Protects the external coil from blows and prevents access to the area below where the compressors and cooling circuit are housed. Every kit includes two grids. Placed on the low pressure side of the cooling circuit, it inhibits functioning of the compressor if abnormal work pressures occur. A - - - - x2 x2 x2 x2 x2 E x2 x2 x2 x2 HA - - - - as per standard as per standard as per standard as per standard as per standard HE as per standard as per standard as per standard as per standard TP3 It allows to view the value of the compressor flow pressure on the microprocessor board display one per circuit.
Placed on the high pres- sure side of the cooling circuit, it inhibits functioning of the compressor if abnormal work pressures occur. A - - - - as per standard as per standard as per standard as per standard as per standard E x2 x2 x2 x2 HA - - - - HE as per standard as per standard as per standard as per standard RIF Current rephaser.
Connected in parallel to the motor, it allows a reduction of the absorbed current. It can only be installed in the machine construction phase and so must be requested on ordering. A - - - - 52 52 53 53 53 E 50 50 50 51 HA - - - - HE 50 50 50 51 DRE It allows the reduction of peak power necessary for the machine during start-up phase accessory applicable only in the factory. It is made up from an adjustment circuit board that varies the number of fan revs.
A - - - - 64 64 64 64 64 E 56 56 57 57 as per standard as per standard as per standard as per standard as per standard HA - - - - 64 64 64 64 65 HE 58 58 59 59 as per standard as per standard as per standard as per standard as per standard DCPX DCPX only for configurations with larger fans M.
Before loading the system, if the installation of an electric heater is not envisaged it is compulsory to replace the plastic caps with the special TRX1. Simple to maintain: Access from the ends of the unit enable in-row servicing. Advanced user-friendly control: User-friendly microprocessor controller enhances mechanical and free cooling.
Contact Us for More Information. Product Highlights Compact footprint: With a footprint half the size of its competition, the WWM fits through standard doors and into elevators. Maximized square footage: The small size frees up valuable square footage for building owners to use for profit-driving purposes.
Ultimate flexibility: Many flexible installation and layout options exist, including back-to-back, side-to-side, top-to-bottom or any of these combinations. Streamlined maintenance: Servicing is easy, even in tight building interiors, since components are in a pull-out drawer. Never-interrupted operations: During servicing, the parallel modules can maintain full operations. Case Studies on Modular Chillers. Contact Us About Modular Chillers We have all the modular chillers necessary for your commercial, industrial, office or multifamily job.
Contact Us. Indoor Pool Dehumidification: Create Healthier Infrastructure Bill What It Means for Office of the Future: 4 Strategies for an Show original message. Either email addresses are anonymous for this group or you need the view member email addresses permission to view the original message. Repeat the exercise several times to check for consistency of results. To achieve correct sight alignment and sight picture, it is imperative that the shooter focus on the front sight.
Be sure to add me to your favorites list! Both Cody and and Germany. Explain and demonstrate the five fundamentals of shooting a rifle. Have them fire five times at a blank target, and have coaches evaluate the shooters. The thumb should rest relaxed on the other side of the frame.
They are the basic skills that form the foundation of a sport activity. Buyer to pay return shipping costs.
Be sure the students rest between each shot. IOA Enterprises has experienced military and law enforcement trained instructors. Published by the National Rifle Association. How did you learn about this training course?
The objective is to try to hold the sights precisely aligned for adjust the pistol sights to place further shot groups in the center of the target. The CMP is a leading national orgaes. Ideally, an instructor will be at each firing point. Be sure your gun is safe to operate.
We fight how we train and this class will put your knowledge and shooting skills to the test. Nra Basic Pistol Course Manual from cloud storage.
But not yet listed. In this site i accept their participation in other nra course! The best pistols for beginning juniors have these Weight. Place the heel of your support hand against the heel of your firing hand.
Training, of course, will substantially reduce the size of the arc of movement. Through this course, the students will learn about pistol parts and operation, ammunition, gun safety, pistol shooting fundamentals, and pistol shooting The Basic Pistol Course will also help prepare the student for participation in other NRA courses. The height of the arm in the illustration, or it may lower, Second Breath and Approach to Target. Access to protect our portable small groups do not accessible to prepare the students demonstrate organizational and nra basic pistol course manual and unloading ammunition, zeroing rifle using either with plenty of.
Demonstrate the knowledge, skills and attitude necessary to safely assume a kneeling position with a rifle. Ideally, an instructor will be at each firing poinb. NRA required training materials. Now is the time to ingrain in the students the habit of frequently checking the action, magazine and chamber of a gun to ensure it is unloaded.
Load, cock, cock, and unload a semiautomatic pistol. We provide online boating and hunting and other recreational safety education. Demonstrate the knowledge, skills and attitude necessary for owning and using a pistol safely. The purpose of this book is to teach the safe and proper use of a pistol so that it can be enjoyed to the fullest extent. If only this one safety rule were always followed, there would be no injuries or damage from unintentional discharges.
Being able to take this course online also allows for a standardization of course materials. In almost all cases, you must be sure that there is something that will serve as a backstop to capture bullets that miss or go through the target. Know your target and what is beyond. Practice Position without a Pistol iii. Good luck with your course! Number of participants per instructor. Study the sosceles position. You must develop a defensive mindset; avoiding a confrontation altogether is the best way to win a deadly encounter.
Embed this gist in your website. Have the students load and fire only one cartridge at a time. My friends are so mad that they do not know how I have all the high quality ebook which they do not!
Set up a table for registration. This website is a rifle association nra certified instructors who do your training organization of pistol course outline and time, brian kim and. Ammunition should not be present when cleaning a pistol. What target will be used? State the course goal and any special requirements for the five lessons. Guide to eye protection outside of basic pistol matches conducted for payment i course manual.
Please indicate your age group. Please make every time to cmp is the other suitable support hand on sight should cock the nra pistol. This course teaches the basic knowledge, skills, and attitude necessary for the safe use of a rifle in target shooting. This course teaches you the policies and procedures for becoming an NRA Instructor as well as effective teaching methods for training students.
Nra gun handling, shooting position before adding the shot and certification will be provided. The guy who was the first head and the guy who started it have both appeared in the civil war history books that I have been reading lately, woohoo for connections. Keep the exercise moving.
Else this rule were most productive mindset recognizes that only focus of nra basic pistol, so obtusely that he is. Access to this website may not be legal outside of the United States. With experience gained by teaching from these lesson plans, you will soon be able to plan an entire course accurately and adhere strictly to your schedule.
Show them how to use daylight, a bore scope, or a white piece of paper to visually examine the bore for remaining powder, lead, or copper residue.
Nra Basic Mower Parts. The gun is loaded with a combination of live cartridges and dummy rounds. Pages are crisp and unmarked.
If the gun is pointing slightly to the right or left, the body is shifted to bring it naturally into target alignment. No products in the cart. Feel free to bring your own sandwiches, snack items, etc. Suggest that they use dryfire practice at home.
This course covers the basic fundamental knowledge of pistols, firearms safety, general handling and operation, loading and unloading techniques, and the fundamentals of pistol shooting. The link for the development of basic pistol course nra or drugs before. Course is presented in two parts: basic instructor training and discipline specific instructor training. Shooting is a sport and competition is part of sport.
During this course you will learn about safe gun handling, the different types of muzzleloading firearms, black powder loads, and shooting fundamentals.
Please choose another date or time. Keep your hands away from your face to prevent ingestion of lead particulate and chemical residues. Ensure that students are using the proper grip and that their arms are fully extended with the sights properly aligned on the target. The instructor then closes the action. What handgun should I buy? Reinforce the proper method of assuming a proper firing grip. The instructors presented a favorable image. Please let me know the caliber of rifle you are bringing.
Students will receive the Basic Rifle Student handbook, and a course completion certificate. Be sure that the students rest between each shot. Caution: Cancelling an event will immediately cancel all registrations, generate a user credit for any payments already made, and send a cancellation email to all registrants.
Real actors on the screen react to your commands or escalate to the use of deadly force. What role do they serve? Soccer is popular all over the world. To load and unload live ammunition from the pistol. Book your adventure today! One pistol for each firing pointiv. Develops NRA Certified Range Safety Officers with the knowledge, skills, and attitude essential to organizing, conducting, and supervising safe shooting activities and range operations.
Firearm Training Courses Offered at BRCV: BRCV is committed to helping our members acquire the knowledge and skills they need to become proficient in firearm use based on the latest firearm handling and reloading techniques. Classes are taught at Acme Ammo, or can be taught at your venue. You or your club may want to develop a similar agreement for use with your shooting activities.
Be sure your corrective instruction is positive. Have students observe and answer questions they may have. Description: The course is divided into two levels. Have studentcoaches and pupils exchange roles. Using any more than five dummy rounds may only increase the anxiety level and begin to tire the shooter. Safely zero a rifle from the benchrest position.
Keep in mind that each qualification level does not need to be conducted in a single session. The shooter aims and pulls the trigger. Emphasize that the two most important fundamentals in pistol shooting are aiming and trigger control.
Keep thegun pointed downrange. The exercise times listed are typical times and your actual experience may vary. Followthrough ensures that the shooter will integrate and continue all shooting fundamentals before, during, and immediately after the shot is fired.
This class teaches students to safely and deliberately present a firearm from the holster to the target, while following proper safety guidelines. During the course, candidates will learn NRA policies and procedures, basic public speaking skills, training methodology, use of a training team and training aids, organizing a course, building a budget, and finally preparing to teach. If necessary, increase the heightof the sandbag or other support to raise the pistol to eye level, which allows an erect head position.
Know where others are at all times. Ammunition can be purchased at the range or you can bring factory loaded ammunition for your pistol. Emphasize Firearm Safety During every lesson, constantly emphasize in words and by your own actions that a gun must always be kept pointed in a safe direction.
The seminar includes classroom instruction on criminal psychology, automobile crimes; cyber safety, home security, and a variety of crime prevention strategies including carjack avoidance techniques, use of personal safety devices, and more.
Dress comfortably and bring a jacket for the range. The biggest change in the new format is that NRA Instructors will not be required to provide as much classroom time, and can spend more time with each student on the range. This class is for everyone. We thank you for your commitment to firearm education and for participating in the training programs of the National Rifle Association.
The NRA Basics of Pistol Shooting course is the best way for you to learn the basics of pistol shooting from the top firearms training organization in the world! In this practice, you may set up benchrest positions with targets at various points.
For CMP and NRA events where the aiming black is proportionately smaller, the aiming point is usually at the bottom of the bull.
0コメント